代理商 德国巴斯夫 ASA/PC KR2861/1C 上海河南

上海圆高塑化公司经营
---------------------------------------------------------------------- 
公司经营:POM,PBT,PA66,PA6,PC+ABS,PA46,LCP,EVA,PC,PEI,PET,ABS、工程塑料,通用塑料,塑料合金等一系列优质原料,欢迎来电来函订购咨询!

上海圆高塑化公司
-----------------------------------------------------------------------
“以信为本、以诚做事、以德做人”是我们圆高的行为准则,我们将客户的满意为我们的目标,维护你我共同利益是我们的责任,与客户建立互惠、互利、互信的合作基础,创造双赢局面,愿与各界人士真诚合作、共同发展、携手共创辉煌明天!

Luran SC KR2861/1C主要色号:
Luran S KR2861/1C BEMAdd to Bookmarks
Luran S KR2861/1C Black BK26410Add to Bookmarks
Luran S KR2861/1C Black BK35914Add to Bookmarks
Luran S KR2861/1C Black BK37431Add to Bookmarks
Luran SC KR2861/1C BK89828Add to Bookmarks
Luran SC KR2861/1C NRAdd to Bookmarks
Luran S KR2861/1C Q105 NaturalAdd to Bookmarks
Luran SC KR2861/1C Q105 WT31425PAdd to Bookmarks
Luran S KR2861/1C Q161 NaturalAdd to Bookmarks
Luran S KR2861/1C Q461 Black BK89828Add to Bookmarks
Luran S KR2861/1C SPLAdd to Bookmarks
Luran SC KR2861/1C SW36870PAdd to Bookmarks
 
Luran SC KR2861/1C 简介:
Luran S KR2861/1C is a blend of ASA and PC providing high heat resistance and extraordinary impact strength
 
Luran SC KR2861/1C 物性表:
Property, Test ConditionStandardUnitValues
Rheological Properties
Melt Volume Rate 220 °C/10 kg ISO 1133 cm3/10 min 3.5
Mechanical Properties
Izod Notched Impact Strength, 4mm bar, 0.25mm Notch Radius, 23 °C ISO 180/A kJ/m2 60
Izod Notched Impact Strength, 4mm bar, 0.25mm Notch Radius, -30 °C ISO 180/A kJ/m2 15
Charpy Notched Impact Strength, 23° C ISO 179 kJ/m2 60
Tensile stress at yield, 23° C ISO 527 MPa 53
Tensile strain at yield, 23° C ISO 527 % 4.9
Tensile Modulus ISO 527 MPa 2300
Tensile Creep Modulus (1000h) ISO 899 MPa 1600
Tensile Creep Modulus (1h) ISO 899 MPa 2000
Elongation at Break (MD) % >50
Flexural Strength ISO 178 MPa 78
Ball Indentation Hardness ISO 2039-1 MPa 95
Thermal Properties
Vicat Softening Temperature VST/B/50 (50°C/h, 50N) ISO 306 °C 120
Vicat Softening Temperature, VST/A/50 (50°C/h, 10N) ISO 306 °C 136
Heat Deflection Temperature; (annealed) method Af, 1.8 MPa ISO 75 °C 106
Heat Deflection Temperature; (annealed) method Bf, 0.45 MPa ISO 75 °C 125
Linear Mold Shrinkage ISO 294-4 % 0.3 - 0.7
Coefficient of Linear Thermal Expansion ISO 11359 10-6/°C 70 - 90
Thermal conductivity DIN 52612-1 W/(m K) 0.17
Electrical Properties
Dielectric Constant (100 Hz) IEC 60250 - 3.4
Dissipation Factor (100 Hz) IEC 60250 - 60
Dissipation Factor (1 MHz) IEC 60250 - 150
Volume Resistivity IEC 60093 Ohm*m 1E12
Surface Resistivity IEC 60093 Ohm 1e+013
Other Properties
Density ISO 1183 kg/m3 1150
Water absorption saturated at 23°C ISO 62 % 0.9
Processing
Processing (Melt) Temperature ISO 294 °C 260 - 300
Mold Temperature ISO 294 °C 80
Injection velocity ISO 294 mm/s 200
Drying Temperature °C 100 - 110
Drying Time hr 2 - 4

主要供应的德国巴斯夫ASA/PC型号:
 
Luran SC KR2861/1C      High heat resistance,High impact strength,高耐热,高抗冲击。
   
Luran SC KR2863C     Highest heat resistance,High impact strength,超高耐热,高抗冲击。
   
Luran SC KR2864C     High flow ability,High heat resistance,高耐热,流动性好。
   
Luran SC KR2866C     Good heat resistance,Medium impact strength,耐热性好,中等抗冲击强度。
   
Luran SC KR2867CWU     Highest flowability,V0 classification,防火V-0级,高流动。
代理商 德国巴斯夫 ASA/PC KR2861/1C 上海河南  代理商 德国巴斯夫 ASA/PC KR2861/1C 上海河南  代理商 德国巴斯夫 ASA/PC KR2861/1C 上海河南